Thursday, June 2, 2011

I recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost

i couldnt afford the $400 job when I got the brakes fixed, but I still need rotors. I have driven it 3 or 4 times since I got the brakes changed. Roughly how much should I expect to spend?I recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost
Well the rotors are $30 - $90 depending on the qualitly of the part desired.

http://www.partsamerica.com/ProductList.



But additionally when replacing a rotor it will require a new set of wheel bearings to be driven/pressed in and greased.

The Fronts are $30 - $70 each wheel

http://www.partsamerica.com/ProductList.



And the rear are (Ooooh Alot , if needed replacement) these are per wheel.

http://www.partsamerica.com/ProductList.



This is just parts with out labor charges.

I hope you have a friendly mechanic .



Man thats a lot of money for this type of car repairs.

You may be able to have your rotors resurfaced with a milling machine for around $15 each. It depends on the thickness of the rotor thats left. The auto parts store can measure the thickness with a micromiter.I recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost
I would take them to a shop so they can check if the rotors can be turned. The shop around here charges me $20 a rotor.I recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost
anywhere from $100.00 to $175.00 here in the Pittsburgh aeraI recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost
You really got ripped if you paid $400 and didn't get rotors turned or replaced. Take it back and demand they be fixed at no additional charge. I hope the $400 included all four wheels.I recently got new brakes and i just need my rotors on my 2003 saturn L200 replaced...how much would this cost
If you wanna do it your self you can most likely buy new rotors for about the same price as they will charge you to turn them so think about that before you go strait to having some one turn them. And get a second opinion about your rotors because i know i would have not let you left the shop if you really needed them. if they dont have grooves in them your mostlikly fine, although they could be warped but you would feel a pulsation in your pedal when you break if they were warped.
  • what is an apr
  • mentally ill person
  •